What Is Thermal Runaway? Thermal Runaway Definition and Battery Application Explained

Definition in einem Satz

Thermal runaway is a self-accelerating exothermic reaction inside a battery, where excess heat generation overwhelms the battery’s ability to dissipate it—rapidly triggering chemical breakdown, gas release, fire, or explosion, especially in lithium-ion cells.¹

Ausführliche Erläuterung

At its core, thermal runaway in lithium-ion batteries starts with an internal event—such as overcharging, mechanical damage, or an internal short circuit—that raises cell temperature. As temperatures rise:

• Around 80°C (176°F): The solid electrolyte interphase (SEI) layer degrades, exposing reactive components.
• ~100°C (212°F): The electrolyte breaks down, releasing flammable gases.
• ~130°C (266°F): The separator (the thin barrier between electrodes) melts, potentially causing direct contact between anode and cathode—leading to rapid heating.
• >150°C (302°F): Cathode materials decompose, releasing more heat and oxygen. This creates an uncontrollable chain reaction that further escalates temperature and pressure.

Once initiated, each stage intensifies the next, culminating in cell rupture, venting of toxic and combustible gases, fire, or—even at the module or pack level—explosion. Notably, if one cell undergoes thermal runaway, the heat can propagate to neighboring cells, heightening the risk for entire battery packs.²

Key Components and Mechanisms

• Trigger Events: Overcharging, short circuits, excessive heating, mechanical damage, or manufacturing defects.
• Chain Reaction: Progressive stages—from SEI breakdown to separator melting—cause heat, gas, and pressure generation.
• Propagation: Heat transfer can lead adjacent cells into runaway, a phenomenon known as propagation.
• Gas and Fire: Gas venting and material combustion foster flame and explosion risk. Gases include hydrogen, methane, and oxygen.

Practical Applications and Real-World Incidents

Thermal runaway is a principal safety concern in every lithium-ion battery application:

• Electric vehicles (EVs) and e-bikes: Incidents have included major recalls and headlines due to battery fires—such as those seen in some EV fires and consumer device failures.³
• Unterhaltungselektronik: The infamous Samsung Note 7 recall was driven by root-cause analysis pointing directly to thermal runaway triggered by internal battery faults.
• Energy Storage Systems: Strict regulatory standards (like UL 9540A und NFPA 855) now require advanced safeguards like thermal barriers and intelligent BMS.

Prevention and Mitigation Measures:

• Integrated Batterie-Management-Systeme (BMS) for real-time monitoring and cutoff functions
• Cell design with thermal fuses or positive temperature coefficient (PTC) materials
• Stringent manufacturing controls and quality assurance
• Physical spacing and barriers within battery packs to slow propagation
• Use of inherently safer lithium chemistries (e.g., LiFePO₄)

Related and Confusing Concepts

• Short Circuit: Uncontrolled electrical pathway often triggering excess heat and initiating thermal runaway.
• Overcharging: Charging beyond rated voltage—causing heat and gas evolution, a common precursor.
• Separator Meltdown: The internal barrier fails, setting the stage for runaway.
• Propagation: The widening of failure from one cell to many.
• Battery Management System (BMS): The electronic system safeguarding against hazardous conditions.
• Fire Triangle: The classical model (fuel, heat, oxygen) that explains fire risk—every factor is present during runaway.

Further Reading

• UL: What is Thermal Runaway?
• Ossila: Thermal Runaway in Batteries
• Gasmet: Thermal Runaway in Lithium-Ion Batteries – Risks and Causes

Summary: Thermal runaway is the pivotal safety hazard for lithium-ion batteries. Understanding its stepwise mechanism, root causes, and prevention strategies is critical for engineers, system designers, and anyone involved in battery technology and safety compliance.